You will need the Adobe® Acrobat® Reader^TM, a plugin available from Adobe Systems, Inc. to view swatches


Count patrons safely and automatically with infrared light

Maintain awareness of patron presence with a continuous invisible beam emitted across the interior doorway to a reflector; beam not affected by sunlight or other indirect light source. Gives warning when infrared beam is blocked.

Interruption of the beam announces patron entering or exiting with pleasant chiming sound which has volume control so you can raise or lower the sound. Chiming can never be turned off completely but if desired, the patron counter can be adjusted to chime only when patrons enter, or only when they exit. Two channel capability allows for selection of 4 sounds.

Equipped with digital counter, visible at entrance, that notes, registers and records activations, both entry and exit. Counter resets easily anytime; tabulates up to 9999 interruptions before resetting. Selective detection range covers 10-20' doorway width.

Counter retains memory, but does not continue count, when power is lost.

Install at least 2 to 3' above the floor.

Includes electronic chime, sensor, power transformers, mounting hardware, 6' power cord, 26' chime wire and reflector.

For Instruction Manual and User's Guide, simply click on Product Guide button.

1 year warranty coverage on workmanship




You will need the Adobe® Acrobat® Reader^TM, a plugin available from Adobe Systems, Inc. to view swatches


Count patrons safely and automatically with wireless infrared technology

Maintain awareness of patron presence with continuous invisible beams emitted across interior doorway to a reflector; beams not affected by sunlight or other indirect light source. Gives warning when infrared beam is blocked.

System Requirements:
Requires wiring from 12V transformer to sensor/transmitter and 12V transformer to receiver.

Interruption of beam, both entry and exit, announces patron with pleasant chiming sound which has volume control; it never shuts off. Two-channel capability allows for selection of 4 sounds. The entry/exit switch may be turned to entry only, if desired.

Equipped with remote digital counter (up to 9999) that operates up to 200' from sensor and can be easily reset at any time. Selective detection range covers doorways up to 20' wide. Retains memory, but does not continue count, when power is lost.

Includes wireless push button that acts as a doorbell; activates chime when pressed up to 200' distance. Powered by internal 12V battery (included); no wires needed. Receiver uses 12 V AC plug. Runs on both batteries or AC adapter.

Protect restricted areas after hours by changing receiver setting from "Chime" to "Alert" mode. Triggers 50-second audible alarm when tripped. Also connects to existing security control panel, video event recorder, siren, bell box, strobe light or any other additional protection device.

Includes: Wireless sensor/transmitter, dual-channel receiver with chime and counter, wireless push button, power transformers, mounting hardware, 6' power cord, reflector, 12V DC battery.

Install unit at least 2 to 3' above the floor.

1 year warranty.

For Instruction Manual and User's Guide, simply click on Product Guide button.

Overall dimensions:
Beam transmitter: 2 5/16H x 3 7/32W x 4 5/16"D
Beam receiver: 4 11/16H x 4 11/16W x 1 5/16"D



Small, lightweight unit has a low profile and is easy to install

Features:

Battery operated, no electrical wiring needed Covers a 20 foot span Integrated 6-digit LCD Description: The Entra patron counter is an infrared beam interruption sensor. Counter consists of 2 components; a built-in 418 MHz radio transmitter, and an IR receiver that, when installed with integrated mounting flange facing transmitter, will cover a span of up to 20 ft. (hardware not included). The IR sensor operates without interference from ambient lighting. The IR transmitter and receiver both have a replaceable long-life lithium battery for wireless operation. Both the IR receiver and the transmitter operate on 3.6-volt lithium batteries. The typical life of the battery in the IR receiver is 2 years. The typical life of the battery in the IR transmitter is 1 year. Dimensions: 1 3/4H x 3 1/2W x 7/8"D

You will need the Adobe® Acrobat® Reader^TM, a plugin available from Adobe Systems, Inc. to view swatches


The WAM system can protect a double door opening with just 2 antennas

The Knogo WAM is a new product in the field of Electronic article surveillance. The WAM system can protect a double door opening with just two antennas. The WAM antennas are "live" at all times.

The system does not rely on a photo eye to be "tripped" before activating the detection field. WAM ensures optimum protection of all secured items, offering superior detection performance using a wide variety of security labels and hard tags.

Includes built-in patron counter.

System features an audible and visible alarm.

Full coverage up to 6 feet in height and 5 feet between antennas.

Uses 110 or 220 voltage.

WAM Antenna Technical Specifications:
Height: 5 ft. 9"
Width: 29"
Antenna Depth: 2.6"
Antenna Weight: 120.0 lbs.

Available in single, dual and triple aisle configurations:
48-125: Single Aisle (2 Antenna)
48-126: Double Aisle (3 Antenna)
48-127: Triple Aisle (4 Antenna)



Return to Product Index