CORROSION INTERCEPT®

This semi-transparent flexible film offers a 5-year protection against corrosion for non-ferrous metals. Designed for less aggressive environments, Corrosion Intercept is the choice for short-term protection, and is fully recyclable.

Corrosion Intercept^® offers a full line of standard and custom packaging products providing corrosion protection to suit most packaging needs. Range of products includes general usage polyethylene to stretch-wrap, coated corrugated boxes, foams, CD sleeves and thermoformed plastics.

Corrosion Intercept^® provides continuous CORROSION protection for all types of metals including multi-metals by removing the corrosive gases. 

The application is simple, just place your products in a Corrosion Intercept^® bag and put your worries of CORROSION away. No vacuum sealing, no heat sealing, just double fold and tape…It's just that simple!

Whether it's for storage, distribution or overseas shipping, Corrosion Intercept^® keeps your products in pristine condition for many years.

1. Corrosion Intercept® Sheets
2. Corrosion Intercept® Flat Bags
   
3. Corrosion Intercept® Zipper Bags
4. Corrosion Intercept® Tubing
5. Corrosion Intercept® Stretch Film
   
6. Corrosion Intercept® Coated Corrugated Boxes
   
7. Corrosion Intercept® Impregnated Thermoformed Plastics
   

ARMORSHIELD PLUS INTERCEPT

Armorshield Plus  Intercept ™ (AS+I) is a new shrink-wrap material with anti-corrosive properties, offering a stronger cover with water wicking properties and a corrosive gas barrier. This is a material with which we make heat-shrinkable kits. AS+I is composed of five layers.

The two outer layers are a special shrink/stretch polyolefin film, which remains flexible after shrinking and contains an advanced ultra-violet inhibitor that will for a long period of time.

The third layer is co-extruded with the first two and contains Static Intercept Technology resin, which blocks corrosive gases that have migrated through the first two layers.

The fourth layer is a 1.5-mil thermoplastic bonding plastic containing no solvents, which is applied to the film in a hot continuous layer. This layer does not come in contact with the surface of the item being protected and will not leave a residue on the surface. Its primary function is to bind the shrink film and polyester fabric together.

The fifth, and inner layer, is a unique spun non-woven polyester fabric, which is completely inert. It will not react with the finish or react with any residual solvents in the finish. It is hydrophilic which is anti-condensing and anti fogging but which wicks away moisture. In addition, it allows the curing process to continue. The anti-condensing properties of this layer help protect the finish from moisture damage. The fifth layer also reflects a majority of the heat during the shrinking process, protecting the finish from over heating and actually causes the film to shrink faster. Additionally, the heating process will only temporarily increase the equipment skin temperature 34-50 degrees Fahrenheit over ambient temperature. The inner non-woven layer is engineered for total scratch resistance. The fibres of the non-woven fabric are aligned for maximum cushion, softness and abrasion resistance.

When shrunk, all layers shrink simultaneously, forming a softer yet stronger finished product, and the film is safe, it contains no solvents or other harmful vapours. The material will maintain its properties under extreme temperatures and the unique laminating process allows the film to remain soft without altering the original characteristics of the inner and outer layers.

See Armorshield Services

CANVAS WITH INTERCEPT

The power of Intercept in a removable cover

Intercept Fabric ™ is a new outdoor fabric with anti-corrosive and ESD protective properties, offering a durable cover and a corrosive gas scavenging barrier. The inner layer scavenges the corrosive gases that cause corrosion, provides galvanic corrosion protection upon contact with the covered item, provides electro-static discharge (ESD) protection, and inhibits mould/mildew from forming on the inside cover surface. Intercept Fabric is a material with which we make reusable form fitting covers. While the exact fabric may vary to meet particular requirements, Intercept Fabric basically is comprised of five layers.

The first (outer) layer is a durable outdoor fabric using denier yarn in the warp and fill. It is pliable, yet strong, and is easily laminated. The yarn is solution dyed and is UV, fade, and mildew resistant, and has excellent cleanability and abrasion properties. Many colours are possible.

The second (middle) layer is a 1.5-mil thermoplastic copolymer extruded between the first and third layers in a hot, continuous layer. This co-polymer does not come in contact with the surface of the item being protected and will not leave a residue on the surface. Its primary function is to bind the outer fabric and Intercept Technology plastic together.

The final three (inner) layers comprise the Intercept Shrinkfilm ™, which in itself is comprised of three co-extruded layers. The two outer layers (fourth and fifth layers) are a special shrink/stretch polyolefin film, which remains flexible after shrinking and contains an advanced ultra-violet inhibitor that will help prolong the life of the film. The fifth layer is co-extruded with the first two and contains Static Intercept Technology resin, which blocks corrosive gases that have migrated through the first two layers.

STATIC INTERCEPT®

Featuring a robust corrosion barrier for both ferrous and non-ferrous metals, Static Intercept also provides permanent ESD protection, making it the ideal choice for the protection of electronics, metals and manufacturing during the shipping, storage, and customs process.

Static Intercept^® provides protection against CORROSION as well as STATIC CHARGE .

With its flexibility in customization of size and thickness, it is the preferred choice for CORROSION protection especially for export shipping and storage in harsh environments.

Static Intercept^® provides continuous CORROSION protection for all types of metals including multi-metals by removing the corrosive gases.

Static Intercept^® also provides PERMANENT protection against STATIC CHARGE protection and is most suitable for applications where both CORROSION and STATIC CHARGE protection are required such as multi-metal products with electronic devices installed.

Application is simple, just use any Static Intercept^® product and witness its effectiveness in CORROSION and ESD protection.

No vacuum sealing or heat sealing is required.Simply double fold and tape…..It's just that simple!

Whether it's for storage, distribution or overseas shipping, Static Intercept^® keeps your products in pristine condition for many years.

1. Static Intercept® Sheets 
2. Static Intercept® Flat Bags 
3. Static Intercept® Zipper Bags
4. Static Intercept® Tubing
5. Static Intercept® Gusseted Liners
6. Static Intercept® Specialty Bags
   • Camera Bags / Pouches
   • Laptop Bags
   • Rifle Bags
   • Customized Bags / Pouches

INTERCEPT SHRINKFILM™



Incorporating Intercept Technology™ and Armorshield Shrinkfilm...

Intercept Shrinkfilm™ possesses all the protective properties of Intercept Technology™ such as:

• Protection against Corrosion
• Inhibiting the growth of Mold and Mildew

As well as properties of Armorshield Shrinkfilm such as:

• Strength
• UV Protection
• Wind Shear Protection
• Flexibility in Configuration

Intercept Shrinkfilm™ has already been used by the US Military (TACOM) for shipment of Rough Terrain Mobile Cranes to the Middle East as well as for preservation of various Air/Land/Sea vehicles with amazing results to show.

Commercially, Intercept Shrinkfilm™ provides effective protection for export of bulky items that are placed on deck during shipment as well as for outdoor storage of products.

With specially customized Aircraft Kits, Helicopter Kits, Vessel Kits, Car Kits, and others, installation and application of Intercept Shrinkfilm™ is fast and effective.

INTERCEPT TOTES

Intercept Thermoformed Tote Bins deliver permanent ESD protection and long lasting corrosion control all within a clean, non-contaminating environment. The Intercept Tote Bins provide maximum protection for all of your sensitve parts, components and assemblies. The tote bins are washable and reusable.

Intercept products allow for the placement of RFID signal devices inside for inventory control. In addition, these innovative products have important properties valued by both domestic and export customers:

• ESD and CDM safe - In the ideal ESD range
• Environmentally and Personnel friendy
• No oils used
• Completely recyclable
• Unaffected by temperature or humidity extremes
• Outdoor storage/shipment stabilized
• Non-Contaminating and Non-out gassing: Safe for all plastics and optic

I-FILM featuring CORROSION INTERCEPT



I-Film features Corrosion Intercept, a polyethylene imbedded with a copper matrix, which is coated with an acrylic adhesive. It is flexible, strong and puncture resistant for easy application. Helps retard acids, corrosive gases, and resists mold and mildew. Strong adhesive sticks to raw wood. Passes the PAT test. 1-1/4” x 28 yards. Standard use in Museum Conservation applications.

R.I.B.S.™ - SHIELDING (REACTIVE INTERCEPT BARRIER SYSTEM)

R.I.B.S.™ Shielding is a combination of two inventions that provide permanent Electrostatic protection (ESD Shielding), full metal-out shielding protection, and a self-contained, de-ionizer for neutralizing corrosive gases. R.I.B.S.™ Shielding is a heavily metalized laminated co-extruded film that contains a single layer of two distinctly different properties:

• One layer is made up of conductive carbon permanently bonded in a polymer chain
• Another layer is a static dissipative, non-sloughing, polymer bonded material with a specially treated copper ions called Corrosion Intercept® that acts as a membrane over the carbon layer.

R.I.B.S.™ Shielding provides 4 protective functions:

1. Permanent Static Dissipative Protection
2. Electrostatic Discharge Shielding with no "Capacitor" Effect
3. Corrosion Protection
4. Organic Ions Absorption by the Carbon Layer

The application is simple, just use any R.I.B.S.™ Shielding products and witness their efectiveness in the four areas above. In addition, no vacuum sealing or heat sealing is required. Simply double fold and tape...it's just that simple! Whether it is for storage, distribution or overseas shipping, R.I.B.S.™ Shielding keeps your products in pristine condition for many years.

R.I.B.S.™ MEDIA

RIBS™ Media Separator Sheets combine the anti-corrosion properties of Intercept with the clean, non-sloughing properties of a carbon leaf product. This co-extruded material performed under filtered nitrogen ensures low particulates, low shaving potential and no shedding.

R.I.B.S™ Media is a revolutionary technology that uses semi-conductor technology to transform standard plastics into semi-conductor material capable of protecting even the most sensitive electronic devices from both Electro-Static Discharge (ESD) and CORROSION damage.

R.I.B.S™ Media is inherently clean with little ionic contamination and low out-gassing. R.I.B.S™ Media is a co-extrusion performed under filtered nitrogen. This design in manufacturing ensures low particulates, low shaving potential and no sloughing.

R.I.B.S™ Media combines the anti-corrosion properties of Corrosion Intercept^® with the clean, non-sloughing properties of Convey Carbon Leaf and provides protection as follows:

   • Protects against charge build-up on sensitive wafers.
   • Electro-Static Discharge protection.
   • Cleanses trapped air of harmful corrosive gases.

Application is simple, just use any R.I.B.S™ Media products and witness their effectiveness. In addition, no vacuum sealing or heat sealing is required, simply double fold and tape…..It's just that simple!

With the move towards Copper Based Wafer Technology, R.I.B.S™ Media is the only packaging material that can protect these Hi-Tech Copper Wafers and keep them in pristine condition for an extended period.

1. R.I.B.S.™ Media Sheets (Wafer Separator)
2. R.I.B.S.™ Media Flat Bags
3. R.I.B.S.™ Media Cleanroom Flat Bags (Attainable up to Class 100 Level)
4. R.I.B.S.™ Media Tubing
   

R.I.B.S.™ MVTR

This heavily metalized co-extruded film provides a reusable package that offers permanent electrostatic protection (ESD and EMI shielding) full MVTR protection, and a self-contained, de-ionizing carbon layer that neutralizes corrosive gases.

R.I.B.S™ MVTR is a combination of two inventions that provide permanent Electrostatic protection (ESD and EMI Shielding), full MVTR protection and a self-contained de-ionizer for neutralizing corrosive gases.

R.I.B.S™ MVTR is a heavily metalized laminated co-extruded film which contains a single layer of two distinctly different properties:

• One layer is made up of conductive carbon permanently bonded in a polymer chain.
• Another layer is a static dissipative, non-sloughing polymer bonded with specially treated copper ions called Corrosion Intercept ® that acts as a membrane over the carbon layer.

R.I.B.S™ MVTR offers the lowest in Moisture Vapor Transmission Rate (MVTR) and provides 4 protective functions:

   1) Permanent Static Dissipative protection
   2) Corrosion protection
   3) Organic ions absorption by the carbon layer
   4) A metallized polyester which provides EMI / ESD Shielding and Moisture Barrier protection.

Application is simple, just use any R.I.B.S™ MVTR products and witness it's effectiveness in the 4 areas above.

Whether it's for storage, distribution or overseas shipping, R.I.B.S™ MVTR keeps your product in pristine dry condition for many years.

1. R.I.B.S.™ MVTR Sheets
2. R.I.B.S.™ MVTR Flat Bags
3. R.I.B.S.™ MVTR Zipper Bags
   

AT TECHNOLOGY

The AT (Antistatic Technology) material provides unequaled static dissipative in a clear film. It was designed as a near-permanent amino-free ESD material. It features a long, stable shelf life and is virtually unaffected by humidity and temperature variations.

Refer to the CHART for more information on which product to choose for your application.