CAL-IN Technology Transfer, L.L.C.

Macro to Micro to Nano... Critical Environmental Experts

Calf

Se Habla Español

Notes for Finishing on Calf
Our range of Calfskin Leather is suitable for the application of metallic, pigmented and genuine gold foils, Genuine Gold Leaf and Blind Tooling. Antique Calf, normally has a protective coating which is suitable for taking foils only, however, but can be supplied without the coating for Gold leaf and Blind Tooling Applications. Please contact us for further details at info@calintec.com . Alum Tawed Calf can only have Gold Leaf applied to it. 

Bookcalf

Our Bookcalf originates mainly from Scandinavia. The skins are aniline dyed and dried on our 'glass' drying machine to enhance the natural smoothness and beauty associated with this quality of leather. The surface is absorbent and lends itself well to additional dyeing by the user.

Average Skin Size: 0.79 - 0.97m² (8½ - 10½ft²)
Approx. Cut Size: 75 x 65 cm
Standard Substance: 0.8 mm
Colours available: 14 standard shades plus fair (undyed) and wheat
Grades: I, II and III
Bookcalf






Archival BV Repair Calf, Dyed

Our new Repair Calf is sourced from the Indian sub-continent. The leather is initially tanned at source using mimosa, or materials from the same family of tannins. When the skins arrive in our Edinburgh Tannery, we remove the majority of this original tannage and then re-tan, using Tara or Sumac. In addition to improving the leather with these superior tannages, we also add our Archival tannage, yielding leather that is both durable and a pleasure to use.

These skins are produced in a mixture of whole skins or 'sides' (half skins taken from much larger whole skins).


*Average Skin Size: 0.80 - 1.0m² (8½ - 10.75 ft²)
Approx. Cut Size: 80 x 50 cm
Standard Substance: 0.75 mm
Colors available: 8 shades plus natural undyed (biscuit) - See next item
Grades: II, III and IV

Archival BV Repair Calf, Dyed

Archival BV Repair Calf, Natural

See Details above

Archival BV Repair Calf, Natural

Faircalf
This leather is identical to the Bookcalf in all respects except that it is undyed. A sample can be seen in the Bookcalf shade link above.

Average Skin Size: 0.79 - 0.97m² (8½ - 10½ft²)
Approx. Cut Size: 75 x 65 cm
Standard Substance: 0.8 mm
Grades: I, II, III and IV




Archival Book Calf

A Scandinavian calfskin tanned using the same process as our standard Bookcalf. The leather is then retanned with aluminum, dyed and left with an aniline finish as with the Bookcalf. Compared to regular Bookcalf (or Repair Calf), it has a slightly bolder grain and is less likely to "bruise" with handling.

Average Skin Size: 0.74 - 0.86m² (8 - 9¼ft²)
Approx. Cut Size: 70 x 60 cm
Standard Substance: 0.8 mm
Colors available: Limited stocks are held in cols.3 (light Brown) and 15 (tan). Other shades may be supplied to order. Please contact us by e-mail for further information.
 
Archival Book Calf


Archival Fair Calf
As the Archival Calf above, the Archival Fair Calf is retanned. However, due to the reaction of myrabolans with aluminium, it must be pointed out that the Fair calfskin is a pale yellow colour rather than the cream colour of our normal Bookcalf production.

Average Skin Size: 0.74 - 0.86m² (8 - 9¼ft²)
Approx. Cut Size: 70 x 60 cm
Standard Substance: 0.8 mm



Bangladesh Vegetable Calf, Natural

This new leather is a cheaper alternative to our normal Faircalf. It should be noted that there are several drawbacks over the traditional Scandinavian calf that relate to the leather's original tannage. This leather is initially tanned using mimosa, or a similar non-light-fast material. Although we remove this original tannage as best we can from the skins and then re-tan using Tara or Sumac, the leather will never have the light-fastness or ageing properties normally expected from our Fair Calf.

In addition to the aging and light-fastness issues, the skins are sourced from many different tanneries in Bangladesh therefore there will be some variation in color within and between packs.

*Average Skin Size: 0.80 - 0.90m² (8¾ - 9¾ ft²)
Approx. Cut Size: 80 x 50 cm
Standard Substance: 0.8 mm

Grades: Run Selection (Equivalent to grade II)
 

Sprinkled Calf

This leather is similar to the Bookcalf, but has an additional "sprinkling" of dye added to give a very attractive look, as quite often found on antique calf-bound books.

Average Skin Size: 0.79 - 0.97m² (8½ - 10½ft²)
Approx. Cut Size: 75 x 65 cm
Standard Substance: 0.8 mm
Colours available: Skins sprinkled upon request
Grades: I and II

Sample
Color 3 - Light Brown

Antique Calf

Antique Calf also undergoes the same processing as the Bookcalf, but instead of leaving the skins with the aniline look, we finish off the surface with a light pigment coating. We then add a second color by 'sponging' or 'side spraying' with dye to give another type of traditional antique look.

Average Skin Size: 0.79 - 0.97m² (8½ - 10½ft²)
Approx. Cut Size: 75 x 65 cm
Standard Substance: 0.8 mm
Colors available: Please inquire regarding availability (this leather is generally "made to order")
Grades: I and II

Sample
Dark Red

Rough Calf

We take natural calf from our standard production and buff the reverse side to impart a soft, suede 'nap'. For this reason Rough Calf is also known as Reverse Calf. Often used for the binding of account books and ledgers. Bookcalf can also be supplied as a rough, however please note that as the skins are color-matched for their grain, variations do occur between batches.

Average Skin Size: 1.07 - 1.16m² (11½ - 12½ft²)
Approx. Cut Size: 80 x 70 cm
Standard Substance: 0.8 mm
Colours available: Natural
Grades: I

Sample

 


Alum Tawed Calf

Alum Tawed Leathers are known for their archival qualities, phenomenal strength and longevity. We produce the Alum Tawed Calf in two shades, white and cream.

Average Skin Size: 0.74 - 0.91m² (8 - 9¾ft²)
Approx. Cut Size: 75 x 65 cm
Standard Substance: 0.9 mm
Colours available: White and Cream
Grades: I and II


Return to Leather Products

Return to Leather Index

Return to Product Index